Enhance your garden landscape with our Interchangeable Outdoor 3W cool white 5000K LED mountable hardscape lights which provides 300 lumens of light at a beam angle of 60 degrees. They are designed to be installed under wall copings and step treads to illuminate outdoor paths, steps, patio and BBQ areas. They need to be powered from a suitable 12v DC LED Driver which we can also provide.
This version is supplied with two brackets to provide the ultimate flexibility for the installer. The main bracket is designed to be fixed in to a wall at the time of construction whereas the alternative bracket is designed for post construction and screws to the wall using the supplied screws and plugs. The LED bar is also easily replaceable to allow for easy maintenance.
The installation plates are made of stainless steel for increased lifespan and the LEDs are mounted in an IP65 waterproof housing. The housing is solid brass with a burnished brass finish.
Note: Please ensure you check the dimension diagram before ordering.
To calculate the driver (power supply), multiply the energy consumption in Watts (W) by the number of lights. In this instance, the energy rating is 3 Watts (for the whole light fitting) so multiply this value by the number of lights and add 25% so the driver is not operating at full capacity. An example if 10 lights are used is to multiply 3 x 10 = 30 watts and add 25% = 37.5 Watts. So any LED driver with a minimum specification of 37.5 Watts at 12V DC will suffice. If you want to leave a bit of room to expand the number of lights at a later date, select a larger driver to accommodate the new lights. The driver will only consume the electricity required by the lights so a 40w driver will consume approximately the same amount of electricity as a 100w driver with the same number of lights.
