Recently Viewed

Outdoor LED Hardscape Landscape Light 3000K 77mm

Outdoor LED Hardscape Landscape Light 3000K 77mm
  Zoom
Outdoor LED Hardscape Landscape Light 3000K 77mmOutdoor LED Hardscape Landscape Light 3000K 77mmOutdoor LED Hardscape Landscape Light 3000K 77mm
Outdoor LED Hardscape Landscape Light 3000K 77mmOutdoor LED Hardscape Landscape Light 3000K 77mmOutdoor LED Hardscape Landscape Light 3000K 77mm
Our Price:  £16.61
List Price:  £19.99
Saving Of:  17%
(Inc. 20% VAT)(£13.84 Exc. VAT)
+

Part Number:  HRD0W530KW1-6001
Colour Temperature:  Warm White 3000K
Lumens:  30
Beam Angle:  60°
Input Voltage:  9-15v AC/DC
Dimmable:  No
LED Power:  0.5W
Cable Length:  3 Metres
IP Rating:  IP65
Dimensions:  (Len) 77mm x (Wid) 75mm (Dep) 20mm
Warranty:  2 Years

Availability:  

  

In stock, immediate despatch


Volume Discount (applied in basket)

Buy 5 for £15.61 each - Save 6%

Buy 10 for £14.95 each - Save 10%

Buy 20 for £14.28 each - Save 14%

Buy 50 for £13.95 each - Save 16%


Enhance your garden landscape with our new Outdoor 0.5W warm white 3000K LED mountable hardscape lights which provide 30 lumens of light at a beam angle of 60 degrees. They are designed to be installed under wall copings and step treads to illuminate outdoor paths, steps, patio and BBQ areas. They need to be powered from a suitable 12v DC LED Driver which we can also provide.

The installation plate is made of stainless steel for increased lifespan and the LEDs are mounted in a waterproof aluminium housing. The housing is very dark brown in colour.

Note: Please ensure you check the dimension diagram before ordering.

To calculate the driver (power supply), multiply the energy consumption in Watts (W) by the number of lights. In this instance, the energy rating is 0.5 Watts (for the whole light fitting) so multiply this value by the number of lights and add 25% so the driver is not operating at full capacity. An example if 10 lights are used is to multiply 0.5 x 10 = 5 watts and add 25% = 6.25 Watts. So any LED driver with a minimum specification of 6.5 Watts at 12V DC will suffice. If you want to leave a bit of room to expand the number of lights at a later date, select a larger driver to accommodate the new lights. The driver will only consume the electricity required by the lights so a 30w driver will consume approximately the same amount of electricity as a 100w driver with the same number of lights.

Be the first to Write a Review for this item!


Related Products
12V DC 30W (2.5A) IP66 Constant Voltage LED Driver

12V DC 30W (2.5A) IP66 Constant Voltage LED Driver£12.73   £10.62